add YuzukiChameleon based on mq-qurd

buildroot/board/yuzukihd/yuzukichameleon/README.md

@@ -0,0 +1,63 @@
+## MangoPI MQ-Quad board (Allwinner H616 chip)
+
+### Direction for use
+- Modify the `board/mangopi/mq-quad/rootfs/etc/wpa_supplicant/wpa_supplicant-wlan0.conf` file, Set the WiFi ssid and password
+- Using `systemctrl start wpa_supplicant@wlan0` command to connect Wifi
+- Using `systemctrl enable wpa_supplicant@wlan0` Automatic startup connection
+- After powering on the board, you can connect to the console through the analog serial port of the OTG typec port
+- Or connect HDMI and keyboard for console interaction.
+
+### Peripheral support
+| **Peripheral** |               **Describe**               |
+|----------------|------------------------------------------|
+|   RTL8723DS    | WiFi/BT                                  |
+|   USB Host     | 1 typec host with2 usb host in misc port |
+|   USB OTG      | 1 typec otg                              |
+|   ethernet     | ethernet for mac1 with ephy in misc port |
+|     UART       | uart1 with uart2                         |
+|  Mini HDMI     | hdmi with audio                          |
+|      I2C       | i2c1 with i2c2                           |
+|  Nor Flash     | spi0 nor flash                           |
+|      SPI       | spi1dev drivers                          |
+|      GPU       | gpu(panforst)                            |
+
+### Build
+```
+# Using mangopi_mq_quad_defconfig
+make mangopi_mq_quad_defconfig
+
+# Start compiling the tf card image
+make
+```
+
+### Test method
+- Bluetooth Test
+```
+bluetoothctl                # Open bluetooth console
+[bluetooth]# power on       # Open bluetooth power
+[bluetooth]# scan on        # Start scanning peripheral devices
+[bluetooth]# devices        # Lists the scanned peripherals
+[bluetooth]# exit           # Exit bluetooth console
+```
+- HDMI Audio test
+```
+# Configure HDMI audio
+amixer -c 1 set 'I2S1 Src Select' 'APBIF_TXDIF0'
+amixer -c 1 set 'I2S1OUT' on
+
+# The -D hw:2,0 command must be run first, before you can use audio normally. (You only need to do this once per startup)
+aplay test.wav -D hw:2,0
+
+# Play music
+aplay test.wav -D hw:1,0
+```
+- GPU Test
+```
+# Perform the following command on the terminal to start scoring (Insert the HDMI screen first)
+glmark2-es2-drm
+
+# Test images can be seen on HDMI while running
+```
+
+### Reference
+https://github.com/open-cores/mangguo-h616-armbian

buildroot/board/yuzukihd/yuzukichameleon/boot.cmd

@@ -0,0 +1,4 @@
+setenv bootargs console=tty0 console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait rw loglevel=1
+setenv bootcmd fatload mmc 0:1 0x4fc00000 boot.scr; fatload mmc 0:1 0x40200000 Image; fatload mmc 0:1 0x4fa00000 sun50i-h616-mangopi-mcore.dtb; booti 0x40200000 - 0x4fa00000
+
+# mkimage -C none -A arm64 -T script -d boot.cmd boot.scr

buildroot/board/yuzukihd/yuzukichameleon/configs/uboot_defconfig

@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h616-mangopi-mcore"
+CONFIG_SPL=y
+CONFIG_DRAM_SUN50I_H616_WRITE_LEVELING=y
+CONFIG_DRAM_SUN50I_H616_READ_CALIBRATION=y
+CONFIG_DRAM_SUN50I_H616_READ_TRAINING=y
+CONFIG_DRAM_SUN50I_H616_WRITE_TRAINING=y
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_I2C3_ENABLE=y

buildroot/board/yuzukihd/yuzukichameleon/devicetree/linux/sun50i-h616-mangopi-mcore.dts

@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sun50i-h616-cpu-opp.dtsi"
+
+/ {
+	model = "MangoPi Mcore";
+	compatible = "mgcc,mangopi-mcore", "allwinner,sun50i-h616";
+
+	aliases {
+		ethernet0 = &emac0;
+		ethernet1 = &emac1;
+		serial0 = &uart0;
+		serial1 = &uart2;
+		mmc0 =&mmc0;
+		mmc1 =&mmc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+	
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+
+		status {
+			label = "led_blue";
+			linux,default-trigger = "heartbeat";
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+			default-state = "on";
+			
+		};
+	};
+	
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 2 8 GPIO_ACTIVE_HIGH>; /* PC8 */
+		status = "okay";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "disabled";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_aldo1>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "disabled";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&emac1{
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&emd_rgmii_phy>;
+	phy-supply = <&reg_aldo1>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&mdio1 {
+	emd_rgmii_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_aldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>,<&spi1_cs_pin>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		status = "okay";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&ohci0 {
+	status = "disabled";
+};
+
+&ohci1 {
+	status = "okay";
+};
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_bldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36  {
+		compatible = "x-powers,axp1530";
+		reg = <0x36>;
+
+		/* dummy interrupt to appease the driver for now */
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+		ldo1in-supply = <&reg_vcc5v>;
+		ldo2in-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: ldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_bldo1: ldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			reg_dcdca: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+              compatible = "realtek,rtl8723ds-bt";
+              device-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+              enable-gpios = <&pio 6 19 GPIO_ACTIVE_HIGH>; /* PG19 */
+              host-wake-gpios = <&pio 6 16 GPIO_ACTIVE_HIGH>; /* PG16 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&ahub_codec {
+	status = "okay";
+};
+
+&ahub_cpudai0 {
+	status = "okay";
+};
+
+&ahub_cpudai1 {
+	status = "okay";
+};
+
+&ahub_cpudai2 {
+	status = "okay";
+};
+
+&sndahub {
+	status = "okay";
+};
+
+&ahub_i2s1 {
+	status = "okay";
+};
+
+&hdmi_audio {
+	status = "okay";
+};

buildroot/board/yuzukihd/yuzukichameleon/devicetree/uboot/sun50i-h616-mangopi-mcore.dts

@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "MangoPi Mcore";
+	compatible = "mgcc,mangopi-mcore", "allwinner,sun50i-h616";
+
+	aliases {
+		ethernet0 = &emac1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac1 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	phy-supply = <&reg_aldo1>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&mdio1 {
+	rmii_phy: ethernet-phy@16 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <16>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_aldo2: aldo2 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+			};
+
+			reg_aldo3: aldo3 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* reserved */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/modules

@@ -0,0 +1 @@
+g_serial

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/systemd/network/00-wireless-dhcp.network

@@ -0,0 +1,5 @@
+[Match]
+Name=wlan0
+
+[Network]
+DHCP=yes

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/systemd/system/getty.target.wants/getty@tty0.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/getty@.service

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/systemd/system/getty.target.wants/serial-getty@ttyGS0.service

@@ -0,0 +1 @@
+/usr/lib/systemd/system/serial-getty@.service

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/systemd/timesyncd.conf

@@ -0,0 +1,21 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it under the
+#  terms of the GNU Lesser General Public License as published by the Free
+#  Software Foundation; either version 2.1 of the License, or (at your option)
+#  any later version.
+#
+# Entries in this file show the compile time defaults. Local configuration
+# should be created by either modifying this file, or by creating "drop-ins" in
+# the timesyncd.conf.d/ subdirectory. The latter is generally recommended.
+# Defaults can be restored by simply deleting this file and all drop-ins.
+#
+# See timesyncd.conf(5) for details.
+
+[Time]
+NTP=time.windows.com
+#FallbackNTP=time1.google.com time2.google.com time3.google.com time4.google.com
+#RootDistanceMaxSec=5
+#PollIntervalMinSec=32
+#PollIntervalMaxSec=2048
+#SaveIntervalSec=60

buildroot/board/yuzukihd/yuzukichameleon/rootfs/etc/wpa_supplicant/wpa_supplicant-wlan0.conf

@@ -0,0 +1,8 @@
+# Auto Connect WiFi: systemctl enable wpa_supplicant@wlan0
+country=CN
+update_config=1
+
+network={
+	ssid="you wifi ssid"
+	psk="you wifi password"
+}

buildroot/configs/yuzukihd_yuzukichameleon_mainline_defconfig

@@ -0,0 +1,63 @@
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TARGET_GENERIC_HOSTNAME="YuzukiChameleon"
+BR2_TARGET_GENERIC_ISSUE="Welcome to Yuzuki Chameleon (allwinner-mainline h616)"
+BR2_INIT_SYSTEMD=y
+BR2_TARGET_GENERIC_ROOT_PASSWD="root"
+BR2_ROOTFS_OVERLAY="board/allwinner-mainline/h616/rootfs board/yuzukihd/yuzukichameleon/rootfs"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/allwinner-mainline/h616/scripts/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/allwinner-mainline/h616/scripts/genimage_sdcard.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.4"
+BR2_LINUX_KERNEL_PATCH="board/allwinner-mainline/h616/patches/linux/"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/yuzukihd/yuzukichameleon/configs/linux_defconfig"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/allwinner-mainline/h616/devicetree/linux/sun50i-h616.dtsi board/allwinner-mainline/h616/devicetree/linux/sun50i-h616-cpu-opp.dtsi board/yuzukihd/yuzukichameleon/devicetree/linux/sun50i-h616-mangopi-mcore.dts"
+BR2_PACKAGE_ALSA_UTILS=y
+BR2_PACKAGE_ALSA_UTILS_AMIXER=y
+BR2_PACKAGE_ALSA_UTILS_APLAY=y
+BR2_PACKAGE_GIT=y
+BR2_PACKAGE_E2FSPROGS=y
+BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
+BR2_PACKAGE_GLMARK2=y
+BR2_PACKAGE_FB_TEST_APP=y
+BR2_PACKAGE_MESA3D=y
+BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_PANFROST=y
+BR2_PACKAGE_MESA3D_OPENGL_EGL=y
+BR2_PACKAGE_MESA3D_OPENGL_ES=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
+BR2_PACKAGE_IPERF3=y
+BR2_PACKAGE_LFTP=y
+BR2_PACKAGE_LFTP_PROTO_SFTP=y
+BR2_PACKAGE_NGINX=y
+BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_BASH=y
+BR2_PACKAGE_DASH=y
+BR2_PACKAGE_HTOP=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="256M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h616"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.10"
+BR2_TARGET_UBOOT_PATCH="board/allwinner-mainline/h616/patches/uboot/"
+BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="board/yuzukihd/yuzukichameleon/configs/uboot_defconfig"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="board/allwinner-mainline/h616/devicetree/uboot/sun50i-h616.dtsi board/yuzukihd/yuzukichameleon/devicetree/uboot/sun50i-h616-mangopi-mcore.dts"
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y