Buildroot for YuzukiSBC
Open Source development package for Allwinner F1C100s & F1C200s
TODO: Translate
Driver support
Check this file to view current driver support progress for F1C100s/F1C200s: PROGRESS-SUNIV.md
Install
Install necessary packages
sudo apt install rsync wget unzip build-essential git bc swig libncurses-dev libpython3-dev libssl-dev
sudo apt install python3-distutils
Download BSP
Notice: Root permission is not necessery for download or extract.
git clone https://github.com/yuzukihd/Buildroot-YuzukiSBC
Make the first build
Notice: Root permission is not necessery for build firmware.
Do not use sudo
Apply defconfig
Caution: Apply defconfig will reset all buildroot configurations to default values.
Generally, you only need to apply it once.
make yuzukihd_yuzukiruler_defconfig
Regular build
make
If changed DTS or kenrel build
./rebuild-kernel.sh
If changed Uboot, build
./rebuild-uboot.sh
Flashing firmware to target
You can flash a board by Linux (Recommended) or Windows system.
Here is the manual.
Helper Scripts
- rebuild-uboot.sh: Recompile U-Boot when you direct edit U-Boot sourcecode.
- rebuild-kernel.sh: Recompile Kernel when you direct edit Kernel sourcecode.
- emulate-chroot.sh: Emulate target rootfs by chroot.