axp20x: Add support for AXP313a PMIC

The X-Powers AXP313a is a PMIC used on some devices with the Allwinner H616 or H313 SoC. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-01-18 21:25:56 +01:00 · 2023-01-18 21:25:56 +01:00 · e9b7c2cabb
commit e9b7c2cabb
parent e91aa6bfb2
5 changed files with 156 additions and 0 deletions
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@ -88,6 +88,7 @@ properties:
          - x-powers,axp209
          - x-powers,axp221
          - x-powers,axp223
+          - x-powers,axp313a
          - x-powers,axp803
          - x-powers,axp806
          - x-powers,axp809
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@ -64,6 +64,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+	{ .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID},
 	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
 	{ },
@ -77,6 +78,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp209", 0 },
 	{ "axp221", 0 },
 	{ "axp223", 0 },
+	{ "axp313a", 0 },
 	{ "axp803", 0 },
 	{ "axp806", 0 },
 	{ },
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@ -39,6 +39,7 @@ static const char * const axp20x_model_names[] = {
 	"AXP221",
 	"AXP223",
 	"AXP288",
+	"AXP313a",
 	"AXP803",
 	"AXP806",
 	"AXP809",
@ -154,6 +155,24 @@ static const struct regmap_range axp806_writeable_ranges[] = {
 	regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
 };

+static const struct regmap_range axp313a_writeable_ranges[] = {
+	regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_range axp313a_volatile_ranges[] = {
+	regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
+};
+
+static const struct regmap_access_table axp313a_writeable_table = {
+	.yes_ranges = axp313a_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
+};
+
+static const struct regmap_access_table axp313a_volatile_table = {
+	.yes_ranges = axp313a_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
+};
+
 static const struct regmap_range axp806_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
 };
@ -272,6 +291,15 @@ static const struct regmap_config axp288_regmap_config = {
 	.cache_type	= REGCACHE_RBTREE,
 };

+static const struct regmap_config axp313a_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.wr_table = &axp313a_writeable_table,
+	.volatile_table = &axp313a_volatile_table,
+	.max_register = AXP313A_IRQ_STATE,
+	.cache_type = REGCACHE_RBTREE,
+};
+
 static const struct regmap_config axp806_regmap_config = {
 	.reg_bits	= 8,
 	.val_bits	= 8,
@ -415,6 +443,16 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1),
 };

+static const struct regmap_irq axp313a_regmap_irqs[] = {
+	INIT_REGMAP_IRQ(AXP313A, PEK_RIS_EDGE,		0, 7),
+	INIT_REGMAP_IRQ(AXP313A, PEK_FAL_EDGE,		0, 6),
+	INIT_REGMAP_IRQ(AXP313A, PEK_SHORT,		0, 5),
+	INIT_REGMAP_IRQ(AXP313A, PEK_LONG,		0, 4),
+	INIT_REGMAP_IRQ(AXP313A, DCDC3_V_LOW,		0, 3),
+	INIT_REGMAP_IRQ(AXP313A, DCDC2_V_LOW,		0, 2),
+	INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH,		0, 0),
+};
+
 static const struct regmap_irq axp803_regmap_irqs[] = {
 	INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V,		0, 7),
 	INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN,		0, 6),
@ -552,6 +590,17 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {

 };

+static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
+	.name			= "axp313a_irq_chip",
+	.status_base		= AXP313A_IRQ_STATE,
+	.ack_base		= AXP313A_IRQ_STATE,
+	.unmask_base		= AXP313A_IRQ_EN,
+	.init_ack_masked	= true,
+	.irqs			= axp313a_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp313a_regmap_irqs),
+	.num_regs		= 1,
+};
+
 static const struct regmap_irq_chip axp803_regmap_irq_chip = {
 	.name			= "axp803",
 	.status_base		= AXP20X_IRQ1_STATE,
@ -683,6 +732,12 @@ static const struct mfd_cell axp152_cells[] = {
 	},
 };

+static struct mfd_cell axp313a_cells[] = {
+	{
+		.name = "axp20x-regulator",
+	},
+};
+
 static const struct resource axp288_adc_resources[] = {
 	DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
 };
@ -900,6 +955,12 @@ int axp20x_match_device(struct axp20x_dev *axp20x)
 		axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
 		axp20x->irq_flags = IRQF_TRIGGER_LOW;
 		break;
+	case AXP313A_ID:
+		axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
+		axp20x->cells = axp313a_cells;
+		axp20x->regmap_cfg = &axp313a_regmap_config;
+		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
+		break;
 	case AXP803_ID:
 		axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
 		axp20x->cells = axp803_cells;
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@ -134,6 +134,11 @@
 #define AXP22X_PWR_OUT_DLDO4_MASK	BIT_MASK(6)
 #define AXP22X_PWR_OUT_ALDO3_MASK	BIT_MASK(7)

+#define AXP313A_DCDC1_NUM_VOLTAGES	107
+#define AXP313A_DCDC23_NUM_VOLTAGES	88
+#define AXP313A_DCDC_V_OUT_MASK		GENMASK(6, 0)
+#define AXP313A_LDO_V_OUT_MASK		GENMASK(4, 0)
+
 #define AXP803_PWR_OUT_DCDC1_MASK	BIT_MASK(0)
 #define AXP803_PWR_OUT_DCDC2_MASK	BIT_MASK(1)
 #define AXP803_PWR_OUT_DCDC3_MASK	BIT_MASK(2)
@ -638,6 +643,48 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
 	.ops		= &axp20x_ops_sw,
 };

+static const struct linear_range axp313a_dcdc1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000,   0,  70,  10000),
+	REGULATOR_LINEAR_RANGE(1220000, 71,  87,  20000),
+	REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
+};
+
+static const struct linear_range axp313a_dcdc2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000,   0, 70, 10000),
+	REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
+};
+
+/*
+ * This is deviating from the datasheet. The values here are taken from the
+ * BSP driver and have been confirmed by measurements.
+ */
+static const struct linear_range axp313a_dcdc3_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000,   0,  70, 10000),
+	REGULATOR_LINEAR_RANGE(1220000, 71, 102, 20000),
+};
+
+static const struct regulator_desc axp313a_regulators[] = {
+	AXP_DESC_RANGES(AXP313A, DCDC1, "dcdc1", "vin1",
+			axp313a_dcdc1_ranges, AXP313A_DCDC1_NUM_VOLTAGES,
+			AXP313A_DCDC1_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
+			AXP313A_OUTPUT_CONTROL, BIT(0)),
+	AXP_DESC_RANGES(AXP313A, DCDC2, "dcdc2", "vin2",
+			axp313a_dcdc2_ranges, AXP313A_DCDC23_NUM_VOLTAGES,
+			AXP313A_DCDC2_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
+			AXP313A_OUTPUT_CONTROL, BIT(1)),
+	AXP_DESC_RANGES(AXP313A, DCDC3, "dcdc3", "vin3",
+			axp313a_dcdc3_ranges, AXP313A_DCDC23_NUM_VOLTAGES,
+			AXP313A_DCDC3_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
+			AXP313A_OUTPUT_CONTROL, BIT(2)),
+	AXP_DESC(AXP313A, LDO1, "ldo1", "vin1", 500, 3500, 100,
+		 AXP313A_ALDO1_CONRTOL, AXP313A_LDO_V_OUT_MASK,
+		 AXP313A_OUTPUT_CONTROL, BIT(3)),
+	AXP_DESC(AXP313A, LDO2, "ldo2", "vin1", 500, 3500, 100,
+		 AXP313A_DLDO1_CONRTOL, AXP313A_LDO_V_OUT_MASK,
+		 AXP313A_OUTPUT_CONTROL, BIT(4)),
+	AXP_DESC_FIXED(AXP313A, RTC_LDO, "rtc-ldo", "vin1", 1800),
+};
+
 /* DCDC ranges shared with AXP813 */
 static const struct linear_range axp803_dcdc234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000,
@ -1040,6 +1087,15 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		def = 3000;
 		step = 150;
 		break;
+	case AXP313A_ID:
+		/* The DCDC PWM frequency seems to be fixed to 3 MHz. */
+		if (dcdcfreq != 3000000) {
+			dev_err(&pdev->dev,
+				"DCDC frequency on AXP313a is fixed to 3 MHz.\n");
+			return -EINVAL;
+		}
+
+		return 0;
 	default:
 		dev_err(&pdev->dev,
 			"Setting DCDC frequency for unsupported AXP variant\n");
@ -1232,6 +1288,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
 						  "x-powers,drive-vbus-en");
 		break;
+	case AXP313A_ID:
+		regulators = axp313a_regulators;
+		nregulators = AXP313A_REG_ID_MAX;
+		break;
 	case AXP803_ID:
 		regulators = axp803_regulators;
 		nregulators = AXP803_REG_ID_MAX;
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@ -17,6 +17,7 @@ enum axp20x_variants {
 	AXP221_ID,
 	AXP223_ID,
 	AXP288_ID,
+	AXP313A_ID,
 	AXP803_ID,
 	AXP806_ID,
 	AXP809_ID,
@ -91,6 +92,17 @@ enum axp20x_variants {
 #define AXP22X_ALDO3_V_OUT		0x2a
 #define AXP22X_CHRG_CTRL3		0x35

+#define AXP313A_ON_INDICATE		0x00
+#define AXP313A_OUTPUT_CONTROL		0x10
+#define AXP313A_DCDC1_CONRTOL		0x13
+#define AXP313A_DCDC2_CONRTOL		0x14
+#define AXP313A_DCDC3_CONRTOL		0x15
+#define AXP313A_ALDO1_CONRTOL		0x16
+#define AXP313A_DLDO1_CONRTOL		0x17
+#define AXP313A_OUTPUT_MONITOR		0x1d
+#define AXP313A_IRQ_EN			0x20
+#define AXP313A_IRQ_STATE		0x21
+
 #define AXP806_STARTUP_SRC		0x00
 #define AXP806_CHIP_ID			0x03
 #define AXP806_PWR_OUT_CTRL1		0x10
@ -322,6 +334,16 @@ enum {
 	AXP22X_REG_ID_MAX,
 };

+enum {
+	AXP313A_DCDC1 = 0,
+	AXP313A_DCDC2,
+	AXP313A_DCDC3,
+	AXP313A_LDO1,
+	AXP313A_LDO2,
+	AXP313A_RTC_LDO,
+	AXP313A_REG_ID_MAX,
+};
+
 enum {
 	AXP806_DCDCA = 0,
 	AXP806_DCDCB,
@ -545,6 +567,16 @@ enum axp288_irqs {
 	AXP288_IRQ_BC_USB_CHNG,
 };

+enum axp313a_irqs {
+	AXP313A_IRQ_DIE_TEMP_HIGH,
+	AXP313A_IRQ_DCDC2_V_LOW = 2,
+	AXP313A_IRQ_DCDC3_V_LOW,
+	AXP313A_IRQ_PEK_LONG,
+	AXP313A_IRQ_PEK_SHORT,
+	AXP313A_IRQ_PEK_FAL_EDGE,
+	AXP313A_IRQ_PEK_RIS_EDGE,
+};
+
 enum axp803_irqs {
 	AXP803_IRQ_ACIN_OVER_V = 1,
 	AXP803_IRQ_ACIN_PLUGIN,