# CB400 Board Configuration with Kernel 6.12 and U-Boot 2025
# This file is the entry point for c5-cb400 board building
#
# Configuration loading order:
# 1. amlogic_common.inc - Common Amlogic configuration
# 2. amlogic_k6.12.inc - Kernel 6.12 specific configuration
# 3. amlogic_uboot2025.inc - U-Boot 2025 specific configuration
# 4. Board-specific settings

# AMLOGIC TODO: Board configuration loading
display_alert "AMLOGIC TODO: Loading c5-cb400 board configuration" "c5-cb400" "info"

load_common_inc() {
    local name="$1"

    if [[ -z "$name" ]]; then
        echo "Usage: load_common_inc amlogic${name}"
        return 1
    fi

    local -a paths=(
        "${AMLBIAN_DIR}/config/boards/include/amlogic${name}.inc"
        "${SRC}/userpatches/config/boards/include/amlogic${name}.inc"
        "${USERPATCHES_PATH}/config/boards/include/amlogic${name}.inc"
        "amlogic${name}.inc"
    )

    for path in "${paths[@]}"; do
        if [[ -f "${path}" ]]; then
            display_alert "${name^^} TODO: Loading common config from" "${path}" "info"
            source "${path}"
            return 0
        fi
    done

    echo "No amlogic${name}.inc found"
    return 1
}

# ==============================================================================
# Section 1: Load Common Configuration from include/
# ==============================================================================

# Try multiple paths to handle different Armbian loading scenarios
load_common_inc -local-sources
load_common_inc -noninteractive
load_common_inc _common
load_common_inc _k6.12
load_common_inc _uboot2025
load_common_inc _avalon

# ==============================================================================
# Section 2: Set bookworm gnome setting
# ==============================================================================
# Release
RELEASE="${RELEASE:-bookworm}"

# Build type
BUILD_DESKTOP="${BUILD_DESKTOP:-yes}"
BUILD_MINIMAL="${BUILD_MINIMAL:-no}"

# Desktop environment — only set when actually building desktop, otherwise
# Armbian validator errors with "DESKTOP_ENVIRONMENT is set, but BUILD_DESKTOP
# is not ==yes". Section 4 below may override BUILD_DESKTOP to "no".
if [[ "${BUILD_DESKTOP}" == "yes" ]]; then
    FULL_DESKTOP="gnome"
    DESKTOP_ENVIRONMENT="gnome"
fi

# Image type
IMAGE_TYPE="stable"

# Compress output
COMPRESS_OUTPUTIMAGE="${COMPRESS_OUTPUTIMAGE:-sha,img.xz}"
LINUX_DEFCONFIG="c5.cfg"


BUILD_UNITS=(
    uboot
    kernel
    rootfs
    modules-load
    udev
    npu
    wifi
    bt
    media-modules
    libion
    libge2d
    liblog
    libencoder
    dma-allocator
    gst-aml
    gst-aml-vendor
    isp
    devtool
    screencapture
    linux-uapi-headers
    mediactrlsrc
)


PACKAGE_LIST_AML="\
screen libdbus-1-dev libical-dev libreadline-dev python3-docutils libsystemd-dev \
systemd-timesyncd xterm \
 gdm3   gnome-session gnome-shell dbus-x11   task-gnome-desktop \
 libva2 libva-dev libva-drm2 libva-x11-2 \
tcpdump netcat-openbsd network-manager adbd/bookworm-backports android-libcutils/bookworm-backports \
libgstreamer1.0-dev libgstreamer-plugins-base1.0-dev \
libavcodec-dev libavformat-dev libavutil-dev libglib2.0-dev libdrm-dev \
gstreamer1.0-tools gstreamer1.0-plugins-base gstreamer1.0-plugins-good \
gstreamer1.0-plugins-bad gstreamer1.0-libav v4l-utils \
systemd libsystemd-dev"

# # ==============================================================================
# # Section 3: Load U-Boot Configuration (2023) from include/
# # ==============================================================================

# declare -a uboot_paths=(
#     "${AMLBIAN_DIR}/config/boards/include/amlogic_uboot2023.inc"
#     "${SRC}/userpatches/config/boards/include/amlogic_uboot2023.
#     "${USERPATCHES_PATH}/config/boards/uboot/amlogic_uboot2023.inc"
#     "${AMLBIAN_DIR}/config/boards/uboot/amlogic_uboot2023.inc"
# )

# for path in "${uboot_paths[@]}"; do
#     if [[ -f "${path}" ]]; then
#         display_alert "AMLOGIC TODO: Loading uboot config from" "${path}" "info"
#         source "${path}"
#         break
#     fi
# done

# ==============================================================================
# Section 4: Board Identification
# ==============================================================================

BOARD="c5-cb400"
BOARD_NAME="Amlogic A123X CB400 Reference Board"
BOARDFAMILY="meson-c5"
BOARD_MAINTAINER="Amlogic Armbian Team"

# Boot configuration
#BOOTCONFIG="c5_cb400_debian"
BOOTCONFIG="c5_cb400"
UBOOT_MACHINE="${BOOTCONFIG}"

# Build policy
RELEASE="${RELEASE:-bookworm}"
BUILD_DESKTOP="${BUILD_DESKTOP:-no}"
BUILD_MINIMAL="${BUILD_MINIMAL:-yes}"
FULL_DESKTOP="gnome"

# Hardware configuration
SERIALCON="ttyAML0"
BOOT_LOGO="desktop"
BOOT_FDT_FILE="amlogic/c5_a123x_cb400_linux.dtb"
ASOUND_STATE="asound.state.amlogic-cb400"

# Chipset info
CHIPSET_NAME="A123X"
INSTALL_TYPE="EMMC"

# Initramfs modules
MODULES_INITRD="mesonc5-cb400-initrd"

# Work name for logging
WORK_BOARD="A123X-CB40X"
# if [ ${HDMIONLY} = "yes" ];then
#     KERNEL_DEVICETREE="c5_a123x_cb400_hdmi_linux.dtb"
# else
#     KERNEL_DEVICETREE="c5_a123x_cb400_linux.dtb"
# fi
KERNEL_DEVICETREE="c5_a123x_cb400_linux.dtb"

# wifi config
WIFI_MODE="w2l"
WIFI_COMM="yes"
MACHINE_EXTRA_RRECOMMENDS+=" aml-wifi-w2l"
DISTRO_FEATURES+=" aml-wifi-w2l"

BT_MODE="w2l"
BT_HCIATTACH="yes"
BT_BLUEZ="yes"

MEDIA_ENCODER_HW_CONFIG="TAHOE HCODEC_JPEG"

TDK_VERSION="v3.8/dev/A123X"
PLATFORM_TDK_VERSION="v4.4.0"

MEDIA_FEATURES="libamljpegenc libtahoevenc gst-plugin-venc-jpeg"

DISTRO_FEATURES+=" vendor-files vendor-partition bluetooth amlogic-tv tvserver mediactrlsrc"
MACHINE_EXTRA_RRECOMMENDS+=" aml-bt-w2 aml-bt-w2l"

AUTOLOGIN="${AUTOLOGIN:-yes}"

# ==============================================================================
# Section 5: Board-Specific U-Boot Functions
# ==============================================================================

# Smarter/faster/better to-spi writer
function write_uboot_platform_mtd__c5_cb400() {
    declare -a extra_opts_flashcp=("--verbose")
    echo "Writing U-Boot to SPI flash /dev/mtd0 using flashcp... ${extra_opts_flashcp}" >&2
    if flashcp -h 2>/dev/null | grep -q -e '--partition'; then
        echo "Confirmed flashcp supports --partition" >&2
        extra_opts_flashcp+=("--partition")
    else
        echo "flashcp does not support --partition, will write full blocks" >&2
    fi
    flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-spi.bin" /dev/mtd0
}

# Board-specific FIP post-processing
function post_uboot_custom_postprocess__c5_cb400() {
    display_alert "AMLOGIC TODO: c5-cb400 Signing u-boot FIP" "${BOARD}" "info"
    # AMLOGIC TODO: Implement FIP signing for cb400
    # uboot_c5_postprocess "${SRC}"/cache/sources/amlogic-boot-fip/mesonc5-cb400 c5
}

# Board-specific extra U-Boot config options
function post_config_uboot_target__c5_cb400_extra_configs() {
    display_alert "AMLOGIC TODO: post_config_uboot_target for c5-cb400" "${BOARD}" "info"
    # AMLOGIC TODO: Add cb400-specific U-Boot config options
    return 0
}

# ==============================================================================
# Section 6: Board-Specific Packaging
# ==============================================================================

function custom_image_packaging__c5_cb400() {
    display_alert "AMLOGIC TODO: Starting custom image packaging for c5-cb400" "${BOARD}" "info"
    # Call common implementation
    custom_image_packaging__amlbian
}

function post_image_creation__c5_cb400_custom_packaging() {
    display_alert "AMLOGIC TODO: Post image creation hook for c5-cb400" "${BOARD}" "info"
    custom_image_packaging__c5_cb400
}

# ==============================================================================
# Section 7: Enable AMLBIAN Extension
# ==============================================================================

ENABLE_EXTENSIONS="amlogic-overlay"

MODS=(amlogic_reset amlogic_snd_codec_es8389 amlogic_snd_codec_ad82120b amlogic-realtek rfcomm)

# ==============================================================================
# Section 8: Board-Specific Notes
# ==============================================================================

# To enable the SPI NOR, the -spi .dtb is required, because eMMC shares a pin with SPI on the REF board.
# To use SPI:
#   fdtfile=amlogic/c5_s905d5_cb400_linux-spinor.dtb in armbianEnv.txt and reboot, then run armbian-install
# After deploying to SPI-NOR/MTD, return back to the normal DTB, otherwise eMMC speed is impaired.

tweaks_platform() {
	echo "tweaks_platform"
	# audio server settings
	if [ -f $ROOTFS_TEMP/etc/pulse/default.pa ]; then

		echo 'load-module module-alsa-source device=hw:AMLAUGESOUND,3' | tee -a $ROOTFS_TEMP/etc/pulse/default.pa
		sed -i "s/#set-default-source input/set-default-source alsa_input.hw_AMLAUGESOUND_3/" $ROOTFS_TEMP/etc/pulse/default.pa
	elif [ -f $ROOTFS_TEMP/usr/share/pipewire/pipewire.conf ]; then

		[ -d $ROOTFS_TEMP/etc/pipewire ] || mkdir -p $ROOTFS_TEMP/etc/pipewire
		cp $ROOTFS_TEMP/usr/share/pipewire/pipewire.conf $ROOTFS_TEMP/etc/pipewire
		cat <<-EOF >> $ROOTFS_TEMP/etc/pipewire/pipewire.conf
		context.objects = [
			# Configure properties in the system.
			{ factory = adapter
				args = {
					factory.name     = api.alsa.pcm.sink
					node.name        = "AML-PCM-Sink"
					node.description = "alsa-sink"
					media.class      = "Audio/Sink"
					api.alsa.path    = "hw:AMLAUGESOUND,1"
					audio.format     = "S16LE"
					audio.rate       = 48000
					audio.channels   = 2
					audio.position   = "FL,FR"
				}
			}

            { factory = adapter
                args = {
                    factory.name     = api.alsa.pcm.sink
                    node.name        = "AML-HDMI-Sink"
                    node.description = "hdmi-audio"
                    media.class      = "Audio/Sink"
                    api.alsa.path    = "hw:AMLAUGESOUND,4"
                    audio.format     = "S16LE"
                    audio.rate       = 48000
                    audio.channels   = 2
                    audio.position   = "FL,FR"
                }
            }

			{ factory = adapter
				args = {
					factory.name     = api.alsa.pcm.source
					node.name        = "AML-PCM-Source"
					node.description = "alsa-source"
					media.class      = "Audio/Source"
					api.alsa.path    = "hw:AMLAUGESOUND,3"
					audio.format     = "S16LE"
					audio.rate       = 48000
					audio.channels   = 2
					audio.position   = "FL,FR"
				}
			}
		]

		context.exec = [
			{ path = "/usr/bin/pactl" args = "set-default-sink AML-PCM-Sink" }
			{ path = "/usr/bin/pactl" args = "set-default-source AML-PCM-Source" }
		]
		EOF
	fi
}

# ==============================================================================
# End of c5-cb400-6.12-bookworm-gnome.conf
# ==============================================================================