139 lines
3.2 KiB
Diff
139 lines
3.2 KiB
Diff
diff -rupbN linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts
|
|
--- linux.orig/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts 1970-01-01 00:00:00.000000000 +0000
|
|
+++ linux/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketace.dts 2025-02-26 13:52:56.398992835 +0000
|
|
@@ -0,0 +1,134 @@
|
|
+// SPDX-License-Identifier: BSD-3-Clause
|
|
+/*
|
|
+ * Copyright (c) 2025, Teguh Sobirin.
|
|
+ * Copyright (c) 2025, ROCKNIX (https://github.com/ROCKNIX)
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "qcs8550-ayaneo-pocket-common.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "AYANEO Pocket ACE";
|
|
+ qcom,board-id = <0x1000b 0x01>;
|
|
+ qcom,msm-id = <0x258 0x20000>, <0x259 0x20000>;
|
|
+ compatible = "ayaneo,pocketace", "qcom,qcs8550", "qcom,sm8550";
|
|
+ rocknix-u-boot-dt-id = "u-boot-pocket-ace";
|
|
+};
|
|
+
|
|
+&tlmm {
|
|
+ panel_pwr_active: panel-pwr-active-state {
|
|
+ pins = "gpio72", "gpio42", "gpio152", "gpio153";
|
|
+ function = "gpio";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ output-high;
|
|
+ };
|
|
+
|
|
+ panel_pwr_sleep: panel-pwr-sleep-state {
|
|
+ pins = "gpio72", "gpio42", "gpio152", "gpio153";
|
|
+ function = "gpio";
|
|
+ output-low;
|
|
+ };
|
|
+
|
|
+ backlight_pwr_active: backlight-pwr-active-state {
|
|
+ pins = "gpio41";
|
|
+ function = "gpio";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ output-high;
|
|
+ };
|
|
+
|
|
+ backlight_pwr_sleep: backlight-pwr-sleep-state {
|
|
+ pins = "gpio41";
|
|
+ function = "gpio";
|
|
+ output-low;
|
|
+ };
|
|
+
|
|
+ ts_int_active: ts-int-default-state {
|
|
+ pins = "gpio25";
|
|
+ function = "gpio";
|
|
+ bias-pull-up;
|
|
+ input-enable;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ clock-frequency = <400000>;
|
|
+ status = "okay";
|
|
+
|
|
+ /* Screen power */
|
|
+ sgm3804: regulator@3e {
|
|
+ compatible = "sgmicro,sgm3804";
|
|
+ reg = <0x3e>;
|
|
+ pinctrl-0 = <&panel_pwr_active>;
|
|
+ pinctrl-1 = <&panel_pwr_sleep>;
|
|
+ pinctrl-names = "default", "sleep";
|
|
+ regulator-name = "panel-avdd";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>, <&tlmm 153 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ /* Backlight */
|
|
+ backlight: sy7758@2e {
|
|
+ compatible = "silergy,sy7758";
|
|
+ reg = <0x2e>;
|
|
+ pinctrl-0 = <&backlight_pwr_active>;
|
|
+ pinctrl-1 = <&backlight_pwr_sleep>;
|
|
+ pinctrl-names = "default", "sleep";
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c4 {
|
|
+ clock-frequency = <400000>;
|
|
+ status = "okay";
|
|
+
|
|
+ touchscreen@70 {
|
|
+ compatible = "syna,rmi4-i2c";
|
|
+ reg = <0x70>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ interrupts-extended = <&tlmm 25 0x2008>;
|
|
+
|
|
+ pinctrl-names = "active";
|
|
+ pinctrl-0 = <&ts_int_active>;
|
|
+
|
|
+ reset-gpios = <&tlmm 24 0x01>;
|
|
+
|
|
+ vio-supply = <&vreg_l12b_1p8>;
|
|
+ vdd-supply = <&vreg_l14b_3p2>;
|
|
+
|
|
+ syna,startup-delay-ms = <200>;
|
|
+ syna,reset-delay-ms = <200>;
|
|
+
|
|
+ rmi4-f01@1 {
|
|
+ syna,nosleep-mode = <0x1>;
|
|
+ reg = <0x1>;
|
|
+ };
|
|
+
|
|
+ rmi4-f12@12 {
|
|
+ reg = <0x12>;
|
|
+ syna,rezero-wait-ms = <20>;
|
|
+ syna,clip-x-low = <0>;
|
|
+ syna,clip-y-low = <0>;
|
|
+ syna,clip-x-high = <1080>;
|
|
+ syna,clip-y-high = <1620>;
|
|
+ syna,sensor-type = <1>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&display_panel {
|
|
+ compatible = "ayaneo,pocket-ace-panel";
|
|
+
|
|
+ avdd-supply = <&sgm3804>;
|
|
+ vci-supply = <&vreg_l13b_3p0>;
|
|
+ vddio-supply = <&vreg_l12b_1p8>;
|
|
+
|
|
+ backlight = <&backlight>;
|
|
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
|
|
+
|
|
+ rotation = <90>;
|
|
+};
|